MP2128DT-LF-Z Overview
As a result of the use of the Cut Tape (CT) package, the performance of this voltage regulator is optimized. As you can see, this harley voltage regulator contains 5 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. For space-saving purposes, this voltage regulator is available in the SC-74A, SOT-753 package. The voltage regulator is configured with 1 outputs. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. Surface Mount-mount switching regulator. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. DC-DC switching regulators reach 2.8MHz switching frequencies. A dc to dc voltage regulator's minimum input voltage of 2.5V is required for this voltage regulator to operate. The adjusting voltage regulator's output voltage (Min/Fixed) is 0.6V. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. For operation, voltage regulator provides a nominal input voltage of 3.6V. Voltage can be produced at 6V volts by voltage regulator. To operate the voltage regulator 12v, 5 pins are required. In order for this switching regulator to work properly, the output voltage should be at least 600mVV. A maximum output current of 1A A is provided to meet the switching regulator operation requirements. The maximum output voltage of this regulator voltage is 6V. This DC-DC switching regulator operates from a supply voltage of 6V.
MP2128DT-LF-Z Features
1 outputs
Peak reflow temperature (Cel) of 260
5 pins
Operating supply voltage of 6V
MP2128DT-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP2128DT-LF-Z Voltage Regulators applications.
- Program control systems
- Access control systems
- SMT equipment
- Combined machine tools
- Servo drive system
- Surface processing equipment
- Linear guide
- Electrical distribution systems
- Grinders
- Computed tomography (CT)
