MP2117DN-LF Overview
It is designed to provide optimal performance by utilizing the Tube package. In this voltage regulator, 8 terminations are present. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. For space-saving purposes, this voltage regulator is available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package. A total of 1 outputs are configured in this voltage regulator. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. There is a switching regulator that is compatible with the Surface Mount mounting. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. This DC-DC switching regulator has a switching frequency of 1.25MHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 2.5V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.6V. It features maximum design flexibility due to dc to dc voltage regulator's 2.2A output current. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 3.6V for the purposes of operation. Voltage can be produced at 6V volts by voltage regulator. To operate the voltage regulator 12v, 8 pins are required. For this switching regulator, it is recommended that the output voltage is at least 600mV volts. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 6V, which is the highest available.
MP2117DN-LF Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MP2117DN-LF Applications
There are a lot of Monolithic Power Systems Inc. MP2117DN-LF Voltage Regulators applications.
- Solar power plants
- Pipe bending machines
- Plate bending machines
- Wind power
- Linear guide
- Arc suppression circuits
- seismic instrument power circuits
- Computed tomography (CT)
- Surface processing equipment
- Telecommunications equipment
