JANTXV1N5308UR-1 Overview
The package includes buck boost converter in version Bulk.The package is in the form of DO-213AB, MELF (Glass).There is a Surface Mount mounted on this current regulator.There should be no temperature above -65°C~175°C at the time of operation.As far as input voltage goes, current regulator supports the value of 100V Max.The 2 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.There are 2 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. This current regulator is mounted by Surface Mount.Its maximum design flexibility is due to the output current of 2.7mA.A maximum supply voltage of 100V can be supported by it.It is a type of FPGA belonging to the Military, MIL-PRF-19500/463 series.Basically, current regulation is made up of 1 elements.As well as METALLURGICALLY BONDED, constant current regulator has another characteristic.
JANTXV1N5308UR-1 Features
Bulk package
The maximal supply voltage of 100V
Military, MIL-PRF-19500/463 series
1 elements
JANTXV1N5308UR-1 Applications
There are a lot of Microsemi Corporation JANTXV1N5308UR-1 Current Regulation/Managements applications.
- Level translating
- Industrial applications current measurement
- Programmable current source
- Vehicle dynamic controls
- Over-current measurement
- Transmission controls
- Power management
- Battery chargers
- Smart battery packs
- DC-to-dc converters
