JANTXV1N5304UR-1 Overview
The package includes buck boost converter in version Bulk.In the same manner as DO-213AB, MELF (Glass), voltage regulator is packaged.Surface Mount is used to mount this current regulator on the board.A maximum operating temperature of -65°C~175°C should not be exceeded during operation.An input voltage wcurrent regulatorh a value of 100V Max may be used as an input voltage.A 2 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 2 termination.2-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.This electronic part is mounted in the way of Surface Mount.With its high output current, 1.8mA is capable of offering maximum design flexibility.There is a maximum voltage to be supplied to 100V by it.The Military, MIL-PRF-19500/463 series of FPGAs fall into this category.A 1-element consists of current regulation.Constant current regulator is also characterized by METALLURGICALLY BONDED.
JANTXV1N5304UR-1 Features
Bulk package
The maximal supply voltage of 100V
Military, MIL-PRF-19500/463 series
1 elements
JANTXV1N5304UR-1 Applications
There are a lot of Microsemi Corporation JANTXV1N5304UR-1 Current Regulation/Managements applications.
- Level translating
- Battery management
- Over-current measurement
- Over current monitor
- Power supply current measurement
- Over-current protection
- DC-to-dc converters
- Programmable current source
- Transmission controls
- Engine management
