JANTX1N5314UR-1 Overview
There is an inclusion of buck boost converter in the package Bulk.In the same manner as DO-213AB, MELF (Glass), voltage regulator is packaged.Mounted by Surface Mount is this current regulator.In order to ensure the correct operation of the system, the temperature should not exceed -65°C~175°C.Current regulator is possible to use a voltage of 100V Max as an input voltage.In addition to the 2 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Computers or other communication constant current regulators have 2 pins, which are pronged contacts.Surface Mount is responsible for mounting this current regulator.The output current of 4.7mA makes it feature maximum design flexibility.The maximum supply voltage of 100V is supported by it.It is of this type that the Military, MIL-PRF-19500/463 series FPGAs are.There are a total of 1 elements in current regulation.As well as METALLURGICALLY BONDED, constant current regulator has another characteristic.
JANTX1N5314UR-1 Features
Bulk package
The maximal supply voltage of 100V
Military, MIL-PRF-19500/463 series
1 elements
JANTX1N5314UR-1 Applications
There are a lot of Microsemi Corporation JANTX1N5314UR-1 Current Regulation/Managements applications.
- DC-to-dc converters
- Over current monitor
- Engine management
- Motor controls
- DC motor control
- Transmission controls
- Industrial applications current measurement
- Battery chargers
- Over-current measurement
- Vehicle dynamic controls
