JANTX1N5306UR-1 Overview
Buck boost converter is part of the package Bulk.In the way voltage regulator is packaged, voltage regulator is in the form of a DO-213AB, MELF (Glass).Surface Mount mounts this current regulator.In order to ensure the correct operation of the system, the temperature should not exceed -65°C~175°C.Voltages of 100V Max can be input as input voltages in this module.An example of this is the 2 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.In computers and other communications constant current regulators, 2 pins are pronged contacts that form part of a signal interface.An current regulator such as this one is mounted by Surface Mount.As a result of 2.2mA's output current, it is one of the most flexible power converters available.A maximum supply voltage of 100V can be supported by it.There are FPGAs of this type in the Military, MIL-PRF-19500/463 series.Basically, current regulation is made up of 1 elements.A further characteristic of constant current regulator is that it possesses METALLURGICALLY BONDED.
JANTX1N5306UR-1 Features
Bulk package
The maximal supply voltage of 100V
Military, MIL-PRF-19500/463 series
1 elements
JANTX1N5306UR-1 Applications
There are a lot of Microsemi Corporation JANTX1N5306UR-1 Current Regulation/Managements applications.
- Diesel injection controls
- Power management
- Transmission controls
- Automotive current measurement
- Suspension controls
- Programmable current source
- Vehicle dynamic controls
- Smart battery packs
- Battery chargers
- Over-current protection
