JANTX1N5301UR-1 Overview
The package includes buck boost converter in version Bulk.A package in the way of DO-213AB, MELF (Glass) is used for voltage regulator.Surface Mount mounts this current regulator.There should be a limcurrent regulator to the operating temperature of -65°C~175°C.As an input voltage, you will be able to input a voltage equal to 100V Max.In addition to the 2 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.2-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.The current regulator is mounted on the Surface Mount axis.The output current of 1.4mA makes it feature maximum design flexibility.Supports the maximum supply voltage of 100V.A type of FPGA that falls under this category is the Military, MIL-PRF-19500/463 series.There are a total of 1 elements in current regulation.A further characteristic of constant current regulator is that it possesses METALLURGICALLY BONDED.
JANTX1N5301UR-1 Features
Bulk package
The maximal supply voltage of 100V
Military, MIL-PRF-19500/463 series
1 elements
JANTX1N5301UR-1 Applications
There are a lot of Microsemi Corporation JANTX1N5301UR-1 Current Regulation/Managements applications.
- Engine management
- Power management
- Power supply current measurement
- Automotive current measurement
- Smart battery packs
- Over-current measurement
- Suspension controls
- Transmission controls
- Programmable current source
- Vehicle dynamic controls
