JANTX1N5291UR-1 Overview
Including buck boost converter in package Bulk is a good idea.Depending on how DO-213AB, MELF (Glass) packages voltage regulator, voltage regulator will be packaged in the same way.This electronic part is mounted in the way of Surface Mount.There should be no temperature above -65°C~175°C at the time of operation.Voltages of 100V Max can be input as input voltages in this module.An example of this is the 2 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.2-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.The current regulator is mounted on the Surface Mount axis.In addition to the maximum design flexibility that 560μA provides, its output current is also quite high.The maximum supply voltage of 100V is supported by it.It is a type of FPGA belonging to the Military, MIL-PRF-19500/463 series.There are 1 elements in current regulation.Moreover, constant current regulator is also characterized by METALLURGICALLY BONDED.
JANTX1N5291UR-1 Features
Bulk package
The maximal supply voltage of 100V
Military, MIL-PRF-19500/463 series
1 elements
JANTX1N5291UR-1 Applications
There are a lot of Microsemi Corporation JANTX1N5291UR-1 Current Regulation/Managements applications.
- Programmable current source
- Power management
- Current sensing
- Over-current protection
- Smart battery packs
- Motor controls
- Over current monitor
- Over-current measurement
- Battery chargers
- Engine management
