JANTX1N5290UR-1 Overview
Buck boost converter is embedded in the Bulk package.DO-213AB, MELF (Glass) has packaged voltage regulator in this manner.Current regulator is mounted by Surface Mount.As a rule of thumb, the operating temperature should not exceed -65°C~175°C.Current regulator supports the input voltage of 100V Max.An example of this is the 2 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.When a computer or other communication constant current regulator has 2 pins, these are pronged contacts.This current regulator is mounted by Surface Mount.Its maximum design flexibility is due to the output current of 470μA.As long as 100V is supplied with the maximum voltage, it is supported.This type of FPGA is represented by the Military, MIL-PRF-19500/463 series.Basically, current regulation is made up of 1 elements.In addition, METALLURGICALLY BONDED is one of constant current regulator's characteristics.
JANTX1N5290UR-1 Features
Bulk package
The maximal supply voltage of 100V
Military, MIL-PRF-19500/463 series
1 elements
JANTX1N5290UR-1 Applications
There are a lot of Microsemi Corporation JANTX1N5290UR-1 Current Regulation/Managements applications.
- Over-current protection
- Automotive current measurement
- DC motor control
- Engine management
- Power supply current measurement
- DC-to-dc converters
- Transmission controls
- Programmable current source
- Power management
- Level translating
