JANS1N5298-1 Overview
Buck boost converter is embedded in the Bulk package.A package in the way of DO-204AA, DO-7, Axial is used for voltage regulator.In this case, Through Hole holds the current regulator in place.There should be a limcurrent regulator to the operating temperature of -65°C~175°C.There is a support for voltages of 100V Max as input voltages for this voltage regulator.A 2 termination can be defined as a terminating voltage regulator which matches the characteristic impedance of a line, which allows a transmission line to be terminated with a voltage regulator matching its characteristic impedance.As part of a signal interface in a computer or other communication constant current regulator, 2 pins are pronged contacts.There is a Through Hole mounting bracket on the back of this current regulator.The output current of 1.1mA makes it feature maximum design flexibility.There is a maximum voltage to be supplied to 100V by it.It is of this type that the Military, MIL-PRF-19500/463 series FPGAs are.Current regulation consists of 1 elements.In addition, METALLURGICALLY BONDED is one of constant current regulator's characteristics.
JANS1N5298-1 Features
Bulk package
The maximal supply voltage of 100V
Military, MIL-PRF-19500/463 series
1 elements
JANS1N5298-1 Applications
There are a lot of Microsemi Corporation JANS1N5298-1 Current Regulation/Managements applications.
- Over current monitor
- Diesel injection controls
- Transmission controls
- DC-to-dc converters
- Battery management
- Engine management
- Battery chargers
- Automotive current measurement
- Over current monitor
- Smart battery packs
