MT48LC32M8A2P-6A:G Overview
There is a memory type Volatile for this type of device. Case Bulk is available. The case is embedded in 54-TSOP (0.400, 10.16mm Width). There is 256Mb 32M x 8 of memory on the chip. DRAM-format memory is used in this device, which is a mainstream design. With an extended designed operating temperature of 0°C~70°C TA, this device is capable of lots of demanding applications. The supply voltage can be up to 3V~3.6V. Its recommended mounting type is Surface Mount. On the chip, there are 54 terminations. In total, 1 functions are supported by this part. An 3.3V supply is required for this ic memory chip to operate properly. It has a clock frequency of 167MHz. A device's base part number, MT48LC32M8A2, is often used in order to identify similar components. This memory device is enclosed in a 54-pin package. According to the datasheet, this memory chip operates at an operating voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. The nominal supply current of this memory component is 100mA. The memory chip also offers AUTO/SELF REFRESH to level up system performance despite its merits. An address can be read and/or written to one memory address using 1 ports on the chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number.
MT48LC32M8A2P-6A:G Features
Package / Case: 54-TSOP (0.400, 10.16mm Width)
54 Pins
Operating Supply Voltage:3.3V
Additional Feature:AUTO/SELF REFRESH
I/O Type: COMMON
MT48LC32M8A2P-6A:G Applications
There are a lot of Micron Technology Inc. MT48LC32M8A2P-6A:G Memory applications.
- multimedia computers
- nonvolatile BIOS memory
- networking
- eDRAM
- Cache memory
- graphics card
- workstations,
- telecommunications
- servers
- DVD disk buffer
