MT29F1G08ABAEAWP-ITX:E Overview
In terms of its memory type, it can be classified as Non-Volatile. It comes in a Tray. As you can see, it is embedded in 48-TFSOP (0.724, 18.40mm Width) case. On the chip, there is an 1Gb 128M x 8 memory, which is the size of the chip's memory. In this device, the memory is of the FLASH-format, which is a popular format in the mainstream computing sector. Featuring an extended operating temperature range of -40°C~85°C TA, this device allows it to be used in a variety of demanding applications. A voltage of 2.7V~3.6V is possible to be applied to the supply. It is recommended to mount it in the Surface Mount mounting type. When selecting similar parts for the ic memory chip, MT29F1G08 is often referred to. It is encased in an 48-pin package that contains this ic memory chip. This memory chip has an operating supply voltage of 3.3V. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. As far as its nominal supply current is concerned, this memory component carries a rating of 35mA. A minimum operating temperature of -40°C must be met by this device. The part should not be operated at temperatures above 85°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The minimum supply voltage for this part should not be less than 2.7V. The operating voltage of the memory ics shall not exceed 3.6V.
MT29F1G08ABAEAWP-ITX:E Features
Package / Case: 48-TFSOP (0.724, 18.40mm Width)
48 Pins
Operating Supply Voltage:3.3V
MT29F1G08ABAEAWP-ITX:E Applications
There are a lot of Micron Technology Inc. MT29F1G08ABAEAWP-ITX:E Memory applications.
- eDRAM
- data buffer
- nonvolatile BIOS memory
- workstations,
- embedded logic
- networking
- Camcorders
- supercomputers
- telecommunications
- Cache memory
