TCM810SENB713 Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 3.3V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 3. Power managment ic pin count is 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 9μA. A similar IC managements number of the manufacturer can always be found by using TCM810, the base power ics number.
TCM810SENB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM810SENB713 Applications
There are a lot of Microchip Technology TCM810SENB713 Voltage Supervisors applications.
- Solar power charger
- Transformer load monitoring equipment
- Power distribution systems of infant care room
- Smart meter
- Computer applications
- Telecommunications equipment
- Electronics installed in the vehicle
- Important electronics for automotive safety
- Household appliances
- Satellite navigation
