TC648VOA713 Overview
The design contains a Cut Tape (CT)package.This part is packed in a 8-SOIC (0.154, 3.90mm Width) case.Drivers controllers is recommended that the part be mounted by Surface Mount.For the component connected to [0], it is suitable.This device is capable of supplying voltages up to 3V~5.5V volts.Operation temperature ranges from 0°C~85°C TA.This motor type can be categorized as Brushless DC (BLDC).A total of 8terminations are available in this part.There is the option of applying the voltage to the load at the rate of -.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.There is a recommended mounting method of Surface Mount.Maintain a current of - for the part output.An analog IC with the model number BRUSHLESS DC MOTOR CONTROLLERis employed in the device.This can be determined by looking at the TC648 part number.8pins are present on the device.A voltage of 3 V to 5.5 V is used as the supply voltage for this driver.Continually maintains the output voltage at TC648.Drivers controllers offers maximum design flexibilDrivers controllersy since Drivers controllerss output current is 1mA.At maximum operating temperatures, the temperature reaches 85 °C.During operation, the temperature should be higher than 0 °C.Controller ic uses 0.5 mAas the supply current for Controller ics operation.Controller ic contains a total of 8pins.Devices that are capable of being applied with a maximum supply voltage of 5.5 V can be applied.3 Vis the minimal supply voltage required.Controller ic should be noted that this chip should be operated at a temperature of 85C°C.
TC648VOA713 Features
Applications : Fan Controller
Load voltage across the chip -
base on TC648 number
with 8 pins
TC648VOA713 Applications
There are a lot of Microchip Technology
TC648VOA713 motor drivers applications.
- Dash
- Footwell lighting
- Indicator
- Telltale lights
- Infotainment backlighting
- Tail lights
- Turn signals
- Brake lights
- CHMSL (center high-mount stop lamps)
- parking lights
