TC54VN2702EZB Overview
As you can see, this power management is mounted through 3 terminals. Packaging is in the form of a Bulk. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management conducts in a 2.1V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 3. This power management system has 3 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 700mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Through Hole mounting is recommended. You should set the supervisor's temperature during -40°C~85°C TA . The output voltage of this power managment ic during operation is Open Drain or Open Collector. For this power management, there is an 3.6μA volt supply current. In addition, IC management are other features such as [0], to mention only a few. For similar manage ics search of the manufacturer, you can always refer to TC54VN2702, the base PMIC number.
TC54VN2702EZB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VN2702EZB Applications
There are a lot of Microchip Technology TC54VN2702EZB Voltage Supervisors applications.
- Smart meter
- WiFi router
- Power communication system
- DC stabilized power supply module
- Military electronics
- Telecommunications equipment
- Refrigeration
- Consumer electronics
- Urban rail transit weak current power monitoring
- Insulation fault location system
