TC54VC4202EMB713 Overview
Power management is mounted through 3 terminals. Tape & Reel (TR)-packaging is used. For your reference, this IC power includes a list of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached TO-243AA functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 2V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. This power management has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 3.6μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by TC54VC4202.
TC54VC4202EMB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VC4202EMB713 Applications
There are a lot of Microchip Technology TC54VC4202EMB713 Voltage Supervisors applications.
- Medical-specific isolation transformer
- Electronics installed in the vehicle
- Detection of phase sequence
- DSP
- Smart meter
- Microprocessor system
- Dash board
- Cloud computing
- Electrical fire monitoring system
- Urban rail transit weak current power monitoring
