TC54VC4102EMB713 Overview
A total of 3 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find TO-243AA functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 2.1V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. A IC power such as this can be classified as a Power Management Circuits power management system. 3 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is always advisable to use TC54VC4102, the base supervisor number, when searching for similar PMICs from the manufacturer. The IC management has a nominal tolerance of 2% that should be noted when measuring and testing.
TC54VC4102EMB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
TC54VC4102EMB713 Applications
There are a lot of Microchip Technology TC54VC4102EMB713 Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Analog circuit
- Unattended substation automation
- Magnetic resonance imaging
- Electric heating appliances
- Set top box
- Automotive power systems
- Power distribution systems of operating room
- Power distribution systems of ICU
- Power distribution systems of infant care room
