TC4422CPA Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.Tube is the packaging method.Configuration is based on 1 drivers.Through Hole is mounted in the way of the device.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.There is a temperature range for this device of 0°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.8 terminations constitute its foundation.There are various parts that can be found under its base part number TC4422.Mosfet driver is mounted using Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.9A is the maximum output current.There are various useful electronic components in its subcategory MOSFET Drivers.The board has a total of 8 component pins.Its maximum power dissipation of 730mW also demonstrates its maximum ability to transfer power without overheating.For higher stability, the supply current should be kept at 1.5mA.During the operation of the system, the voltage of the operating supply should be set to 15V.
TC4422CPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4422CPA Applications
There are a lot of Microchip Technology TC4422CPA gate drivers applications.
- Topologies
- Broadcast equipment
- Motor Drives
- Uninterruptible Power Supplies (UPS)
- Digitally controlled power supplies
- Smart Phones
- Isolated switch mode power supplies (SMPS)
- Motor Controls
- High frequency line drivers
- Video amplifiers
