TC1271ATVCTTR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 3.3V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 5 pins on power management. This power management has 5 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 10μA, this PMIC is capable of fully function as specified. It is always advisable to use TC1271A, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 3.3V volts of power.
TC1271ATVCTTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
TC1271ATVCTTR Applications
There are a lot of Microchip Technology TC1271ATVCTTR Voltage Supervisors applications.
- Insulation fault location system
- Embedded computing
- Set top box
- Power distribution systems of CCU
- Leakage protection
- Smartphones
- Telecommunications equipment
- Power distribution systems of ICU
- Radar
- Network equipment
