SY100S838ZG-TR Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. The 20-SOIC (0.295, 7.50mm Width) package contains this clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. As you can see, it consists of 20 terminations. For this clock generator ic, a voltage of 5V is required. This clock generator receives its inputs from ECL, PECL, which is designed to be the clock source. For full access to the electronic component's capabilities, 1 circuits are implemented. PLL clock is mounted in the way of Surface Mount. 5.5V would be the maximum supply voltage for this clock generator. Clock generators should operate with the voltage supply of 4.2V~5.5V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. The frequency synthesizer in this product is compatible with all levels of Clock logic. It has been classified as a Clock Generator electronic part, which means that it is a semiconductor. This part number is related to its related electronic parts. There are 20 pins on the frequency generators that are available for use. This electronic part is a member of the Precision Edge? series. The output frequency is magnified as high as possible with 4 signal outputs. The timing skew of this frequency synthesizer is low at 0.05 nsmax. By operating at a frequency of 1GHz, RF synthesizer is able to reali1GHze high efficiency. There is no doubt that the TR package is an ideal fit for this clock generator ic.
SY100S838ZG-TR Features
Available in the 20-SOIC (0.295, 7.50mm Width)
Supply voltage of 5V
SY100S838ZG-TR Applications
There are a lot of Microchip Technology SY100S838ZG-TR Clock Generators applications.
- Signal frequency synthesis circuits
- Wi-Fi routers
- FSK demodulators
- Bluetooth receivers
- Instrument
- PCI express cards
- Frequency Modulation (FM) stereo decoders
- VSAT (Small Ground Satellite Station)
- Picocells, femtocells and small cells
- Carrier synchronization in wired communication
