PL585-P8-058OC-R Overview
The Tape & Reel (TR) method is used for packaging clock ICs. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. Clock generator ics require a voltage of 3.3V. Crystal is designed for clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. A clock-based RF synthesizer that provides a max frequency of 200MHz is available. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. As long as there are 2.97V~3.63V supply voltages provided, clock generator ic should work. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. In this case, we are dealing with a frequency synthesizer that can be used with LVCMOS, LVDS, LVPECL logic levels. You can find related electrical components to the base part number PL585. A 16 pin is available on the clock PLL. This clock PLL features TRI-STATE; ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT; TR for better clock signal output. The frequency used for frequency synthesizer's normal operation should not exceed 200MHz.
PL585-P8-058OC-R Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
PL585-P8-058OC-R Applications
There are a lot of Microchip Technology PL585-P8-058OC-R Clock Generators applications.
- Bluetooth receivers
- Carrier synchronization in wired communication
- Time to digital converters
- Wide area power system
- Signal demodulation
- Mixed mode (analog and digital) applications
- Pulsed digital systems
- Small signal recovery
- Media broadcast servers
- Satellite receivers
