PL585-P8-028OC-R Overview
Tape & Reel (TR)-method packaging is used for clock ICs. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. A voltage of 3.3V should be applied to this electronic frequency generator. Crystal is designed as this clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. It provides a maximum frequency of 84.375MHz. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. There are 2.97V~3.63V available for use with this clock PLL. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. In this case, we are dealing with a frequency synthesizer that can be used with LVCMOS, LVDS, LVPECL logic levels. According to the base part number PL585, its related parts can be found. A 16 pin is available on the PLL. TRI-STATE; ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT; TR is included in this frequency generator to enhance clock signal output. With its steady structure and advanced building process, this RF synthesizer can run at up to 84.375MHz MH84.375MHz. This analog clock generator may occasionally run at its lowest possible frequency, but don't worry; Just follow the datasheet instructions.
PL585-P8-028OC-R Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
PL585-P8-028OC-R Applications
There are a lot of Microchip Technology PL585-P8-028OC-R Clock Generators applications.
- Remote telemetry and instrumentation
- Ports
- Automatic test equipment
- FPGA and processor clocks
- Main oscillator in receiver
- Signal generator
- Integrated phase noise in aerospace systems
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Bluetooth transmitters
- Satellite receivers
