PL502-39OI-R Overview
As a clock IC, it is packaged by the Tape & Reel (TR) method. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. Basically, this time clock generator needs a voltage of 3.3V. There is a Clock PLL called Crystal which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 800MHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 2.97V~3.63V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with LVDS logic levels. The related electronic parts of part number PL502 are listed below. TRI-STATE; ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT; TR is included in this frequency generator to enhance clock signal output. Because of its steady structure and advanced building process, this clock generator can generate clock rates up to 800MHz ticks per second. Occasionally, this time clock generator may run at its lowest possible frequency; but don't worry, just follow what the datasheet says.
PL502-39OI-R Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
PL502-39OI-R Applications
There are a lot of Microchip Technology
PL502-39OI-R Clock Generators applications.
- Picocells, femtocells and small cells
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
- Fiber Channel
- PCI express cards
- Infotainment systems
- Medical equipment
