MIC919YC5-TR Overview
Packaged in a 5-TSSOP, SC-70-5, SOT-353 case, the buffer op amp is ready to use. An op amp ic of the Voltage Feedback type. The op amp is delivered to you in a Tape & Reel (TR) case. A total of 5 pins are present on the instrumentation amplifier. There is an input offset voltage of 400μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 360μA, this op amp ic can operate. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 1 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 85°C should be used. As a result, it is recommended that a power supply of 360μA be used with this electronic part. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 9V.
MIC919YC5-TR Features
MIC919YC5-TR Applications
There are a lot of Microchip Technology
MIC919YC5-TR Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
