MIC842HYC5-TR Overview
The product is packaged in 5-TSSOP, SC-70-5, SOT-353 for ease of transportation.The comparator has an output type of Push-Pull .This chip is designed with the Tape & Reel (TR) package.In terms of type, this is a typical with Voltage Reference comparator.Electronic comparator has a total of 1 elements.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.There are 5 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MIC842 .There is a quiescent current of 3μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 3μA .Comparator electronics is not recommended to operate at a temperature higher than 85°C .Comparator electronics is not suComparator electronicsable for temperatures below -40°C .A comparator's maximum supply voltage is 5.5V .There is a minimum supply voltage of 1.5V for this comparator.In order to maintain the quality of the output, 1 channels cooperate together.Comparator electronics is a comparator part from the Teeny™ series.
MIC842HYC5-TR Features
Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3μA
MIC842HYC5-TR Applications
There are a lot of Microchip Technology
MIC842HYC5-TR linear comparators applications.
- Notebooks and PDAs
- Battery-Powered Electronics
- General-Purpose Portable Devices
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
