MIC79050-4.2YM Overview
There is a package for Tube in which it can be found.We've included it in the 8-SOIC (0.154, 3.90mm Width) package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~125°C TJ in order to ensure reliable performance.The device requires Constant Pulsed current to charge.The related parts of the base part number MIC79050 can be found by following the order of the base part number.As far as the battery pack is concerned, it is 4.2V.It requires pins 8 to function.The number of available channels is 1.Devices require 16V as their maximum supply voltage.In order for the device to operate properly, the supply voltage should not exceed 16V.When the output voltage is 4.2V, high efficiency is possible.In this case, the output current of the device is set to 500mA.A supply voltage of 2.5V is suitable for it, because it can operate with a low supply voltage.Amounting is in line with Surface Mount.Input voltage is limited to 20V volts.As far as its supplier package of the device is concerned, it is 8-SOIC.Temperatures lower than -40°C degrees Celsius ensure reliable operation.A maximum operating temperature of 125°C°C is required for reliable operation.
MIC79050-4.2YM Features
Battery pack voltage of 4.2V
1 channels
8-SOIC (0.154, 3.90mm Width) package
MIC79050-4.2YM Applications
There are a lot of Microchip Technology
MIC79050-4.2YM Battery Chargers ICs applications.
- Golf carts
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
