MIC5253-3.3YC5-TR Overview
In a Cut Tape (CT) case, the IC voltage regulator is delivered. A 5-TSSOP, SC-70-5, SOT-353 case contains the Liner IC. This PMIC chip has an output type of Fixed. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 100mA. There are 5 pins in total on this board. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. A 5-pin is present on the chip. It is MIC5253 for this voltage regulator IC, just for your information. I would describe this component as a typical PMIC - Power Management ICs component. In this case, the regulator type is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR, which corresponds to this voltage regulator IC. A maximum output current of 100mA is required to meet the operation requirements. It operates in the 100μA Quiescent Current state. In fact, it is voltage regulator IC of the Teeny™ Series of cameras. When the temperature is below 125°C, you are advised to use the voltage regulator IC. The chip's operating temperature cannot be lowered below -40°C. Tolerance for this regulator IC is 1.5 %, which is very low.
MIC5253-3.3YC5-TR Features
165mV dropout voltage
PMIC - Power Management ICs subtageroy
The maximum operating temperature of -40°C
1.5 % tolerance
MIC5253-3.3YC5-TR Applications
There are a lot of Microchip Technology
MIC5253-3.3YC5-TR Linear Voltage Regulators applications.
- Portable telephone
- Electronic notebook
- Camera
- Video equipment
- CPU power supply
- Switching regulator
- Multiple-power supply system
- Digital audio player
- Digital TV
- Smartcard
