MIC38HC43YN Overview
In the 8-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tube surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 7.6V~20V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~85°C TA dc switcher. dc dc regulator is made easier with Through Hole. In order to control switching efficiently, the dcdc regulator features Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 8. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. In addition to "MIC38HC43", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. Input voltage of dc dc voltage regulator must be 7.6V. It should be noted that the dc to dc regulator only accepts 20V voltage as input voltage. It's important to remember that the dc dc regulator's normaloutput current is 1kA, so you should note it down when starting a new project. The Through Hole makes DC switcher suitable for most applications and prototypes. DC regulator500kHz has the maximum frequency. This voltage controller requires a supply voltage of 15V. A controller's current should not exceed 6mA. 500kHz is the frequency at which this controller performs well most of the time.
MIC38HC43YN Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Switching Frequency: 500kHz
MIC38HC43YN Applications
There are a lot of Microchip Technology MIC38HC43YN DC to DC converter applications.
- Household control circuits
- Various precision measuring detectors
- Machining centers
- Medical monitoring systems
- Electric water heaters
- Alternators
- Experimental setup
- Grinders
- Access control systems
- Correction machines
