MIC3809YM-TR Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. 1 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 2V~14V and has a 2V~14V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. It can switch at 200kHz. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control. You can find other relevant dc to dc converter ics by searching "MIC3809". The switching converter has a total of 8 pins. Based on the test statistics, DC regulator outputs voltage 12V. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 49 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 1MHz. Switching controllers work at 1MHz Hz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 14V. At least -40°C°C is recommended. At a temperature around 85°C degrees Celsius, dc regulator should be running. A supplier dc dc controller package of 8-SOIC would be used for this part. This controller switches with 1 phases. When it comes to maximum supply voltage, switching voltage regulators is rated 15V. The component might suffer damage if the current exceeds 2mA.
MIC3809YM-TR Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Frequency Control
Max Duty Cycle: 49 %
Frequency: 1MHz
MIC3809YM-TR Applications
There are a lot of Microchip Technology MIC3809YM-TR DC to DC converter applications.
- Magnetohydrodynamic power
- Low output voltage switching power supply circuits
- Milling machines
- Overvoltage protection circuits in TV sets
- Machining centers
- Printing
- Remotely powered electric motors
- Driver circuits
- Direct power supply system
- Shearing machines