Name: MIC29302AWD-TR
Brand: Microchip Technology
SKU: MIC29302AWD-TR
Price: 2.52000 USD
Availability: InStock

new-10%

MIC29302AWD-TR

Manufacturer part number:MIC29302AWD-TR

Manufacturer:Microchip Technology

Description:Enable Adjustable MIC29302A PMIC -- Series 5 TO-252-6, DPak (5 Leads + Tab)

Case Package:SOT-23

Datasheet:MIC29302AWD-TR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-252-6, DPak (5 Leads + Tab)
Supplier Device Package	TO-252-5
Mounting Style	SMD/SMT
Supplier Package	TO-252
Junction to Case	3 °C/W
Input Voltage Range	3, 16 V
Maximum Input Voltage	16 V
Junction to Ambient	35 °C/W
Mounting	Surface Mount
Dropout Voltage@Current (Max)	0.2@100MA/0.8@3A
Package Type	TO-252
Operating Temp Range	-40C to 125C
MSL	-
Maximum Operating Temperature	+ 125 C
Minimum Operating Temperature	- 40 C
Manufacturer	Microchip
Brand	Microchip Technology
Package	Tape & Reel (TR);Cut Tape (CT);Digi-Reel®;
Base Product Number	MIC29302
Mfr	Microchip Technology
Product Status	Active
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
Series	--
Tolerance	1 %
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
ECCN Code	EAR99
Type	LDO
Terminal Finish	Matte Tin (Sn) - annealed
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
HTS Code	8542.39.00.01
Subcategory	PMIC - Power Management ICs
Peak Reflow Temperature (Cel)	260
Reach Compliance Code	not_compliant
Base Part Number	MIC29302A
Pin Count	5
Function	LDO
Current - Supply (Max)	150mA
Number of Outputs	1
Voltage - Input (Max)	16V
Output Voltage	15V
Output Type	Adjustable
Polarity	Positive
Output Configuration	Positive
Output Current	3 A
Current - Output	3A
Control Features	Enable
Input Voltage (Min)	3(V)
Voltage - Output (Min/Fixed)	1.24V
Number of Regulators	1
Min Input Voltage	3V
Protection Features	Over Current, Over Temperature, Reverse Polarity
Current - Quiescent (Iq)	20mA
Voltage Dropout (Max)	0.8V @ 3A
PSRR	--
Reference Voltage	1.267 V
Dropout Voltage	450mV
Product Type	LDO Voltage Regulators
Regulator Type	FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Voltage - Output (Max)	15V
Min Current Limit	3A
Screening Level	Extended Industrial
Output Voltage Accuracy	2 %
Line Regulation	0.5 %
Load Regulation	1 %
Product	LDO Voltage Regulators
Input Voltage	16(V)
Product Category	LDO Voltage Regulators
Output Voltage Range	1.24 V to 15 V
Width	6.2 mm
Height	2.387 mm
Length	6.604 mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MIC29302AWD-TR Product Details

MIC29302AWD-TR Overview

In a Cut Tape (CT) case, the IC voltage regulator is delivered. A TO-252-6, DPak (5 Leads + Tab) case contains the Liner IC. This PMIC chip has an output type of Adjustable. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 3A. There are 5 pins in total on this board. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. It is MIC29302A for this voltage regulator IC, just for your information. I would describe this component as a typical PMIC - Power Management ICs component. In this case, the regulator type is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR, which corresponds to this voltage regulator IC. In fact, it is voltage regulator IC of the -- Series of cameras. When the temperature is below 125°C, you are advised to use the voltage regulator IC. The chip's operating temperature cannot be lowered below -40°C. Tolerance for this regulator IC is 1 %, which is very low.