MIC29150-3.3WU Overview
In a Tube case, the IC voltage regulator is delivered. A TO-263-4, D2Pak (3 Leads + Tab), TO-263AA case contains the Liner IC. This PMIC chip has an output type of Fixed. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 1.5A. There are 3 pins in total on this board. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. A 3-pin is present on the chip. It is MIC29150-3.3 for this voltage regulator IC, just for your information. I would describe this component as a typical PMIC - Power Management ICs component. In this case, the regulator type is Low Dropout Voltage, which corresponds to this voltage regulator IC. A maximum output current of 1.5A is required to meet the operation requirements. It operates in the 20mA Quiescent Current state. In fact, it is voltage regulator IC of the -- Series of cameras. When the temperature is below 125°C, you are advised to use the voltage regulator IC. The chip's operating temperature cannot be lowered below -40°C. Tolerance for this regulator IC is 1 %, which is very low.
MIC29150-3.3WU Features
350mV dropout voltage
PMIC - Power Management ICs subtageroy
The maximum operating temperature of -40°C
1 % tolerance
MIC29150-3.3WU Applications
There are a lot of Microchip Technology
MIC29150-3.3WU Linear Voltage Regulators applications.
- Portable telephone
- Electronic notebook
- Camera
- Video equipment
- CPU power supply
- Switching regulator
- Multiple-power supply system
- Digital audio player
- Digital TV
- Smartcard
