MIC2595-2YM Overview
In the 14-SOIC (0.154, 3.90mm Width) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller, Sequencer.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for -48V are available on the device.A feature of Latched Fault describes it.Using a -80V~-19VV power source should be able to power the device.The MIC2595 family includes it.During operation, 14 pins are used.Hot-swappable device has Current Limit, Fault Timeout, UVLO programmable features.Presently, there is a sufficient supply of 4mA.As you can see, it is positioned in the direction of Surface Mount.For stable operation, the maximum operating temperature should be 85°C°C.At a minimum working temperature of -40°C degrees Celsius, it maintains its reliability.Hot Swap is set by default to output 1.An input voltage of -80VV is the maximum it can handle.Device --V has a maximum output.Using a low supply voltage, such as -19VV, will be feasible.Hot Swap is 4mA which is the operative supply current.There is a maximum current requirement of 6mA for it to operate.There is an electrical component in this series called --.
MIC2595-2YM Features
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, UVLO
-- series
MIC2595-2YM Applications
There are a lot of Microchip Technology
MIC2595-2YM hot swap controllers applications.
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
- Central office switching systems
