MIC2588-1BM-TR Overview
In the 8-SOIC (0.154, 3.90mm Width) package you will find it.Channel 1 is currently available.A Tape & Reel (TR)-shaped package holds it.Device DUAL is located at the terminal position.The device consists of a total of 8 pins.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for -48V are available on the device.A feature of Fault Timeout, Latched Fault describes it.Using a -80V~-19VV power source should be able to power the device.The MIC2588 family includes it.Hot-swappable device has Current Limit, OVP, Slew Rate, UVLO programmable features.Presently, there is a sufficient supply of 3mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 19 V so that the device can function normally.Vsup is set to 80 V, the maximum supply voltage.As you can see in this example, the gadget uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Device --V has a maximum output.There is an electrical component in this series called --.
MIC2588-1BM-TR Features
The terminal position of 8
Features of Fault Timeout, Latched Fault
Programmable features of Current Limit, OVP, Slew Rate, UVLO
-- series
MIC2588-1BM-TR Applications
There are a lot of Microchip Technology
MIC2588-1BM-TR hot swap controllers applications.
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
- Central office switching systems
