MIC2291YD5-TR Overview
There is also a SOT-23-5 Thin, TSOT-23-5 package that is used to save space on the board. LED drivers use 1 outputs for their design.This mounting method is Surface Mount.In this case, the result is a DC DC Regulator with high efficiency.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.Camera Flash provides many benefits.Based on the frequency of 1.2MHz, it operates.It is configured with 5 pins as its base.It is possible for undetermined failures to occur if the voltage supply is lower than 2.5V.3 segments exist.There is a mounting of it by Surface Mount.It is under the base part number MIC2291 that you can find this LED driver.There is no maximum value acceptable for the supply voltage, so 10V is acceptable.It supports a maximum value of 10V.The system works with a minimum supply voltage of 2.5V in order to achieve maximum efficiency.Operating temperatures should not exceed 125°C in order to ensure stable operation.Stable operation requires a temperature higher than -40°C.34V is the voltage at the output terminal.It is recommended that the output voltage be no higher than 34V.
MIC2291YD5-TR Features
Available in the SOT-23-5 Thin, TSOT-23-5 package
Operating temperature of -40°C~125°C TJ
Frequency of 1.2MHz
Output voltage of 34V
MIC2291YD5-TR Applications
There are a lot of Microchip Technology MIC2291YD5-TR LED Driver ICs applications.
- Street lighting
- Amusement Machines
- Constant Voltage Power Source for portable equipment
- Stage and Studio lighting
- Gallery lighting
- LED Lightings for Inspection Devices
- OLED power supply for portable equipment
- General lighting
- LED headlights
- Flicker-free LED Lighting using R1580N
