MIC2185YQS Overview
In the 16-SSOP (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 2.9V~14V volts and has 2.9V~14V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 400kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Soft Start is included in the dcdc regulator. In addition to "MIC2185", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. Voltage regulator dc to dc is designed to operate at 85 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator440kHz has the maximum frequency. A frequency of 440kHz is set for the switching controller. You should keep dc regulator at -40°C degrees or higher. There should be 125°C temperature above 125°C degrees Celsius when dc regulator runs. There would be 16-QSOP supplier dc dc controller package for this part. 3.8mA volts is the supply current. Voltage rating is 14V.
MIC2185YQS Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Frequency Control, Soft Start
Max Duty Cycle: 85 %
Frequency: 440kHz
MIC2185YQS Applications
There are a lot of Microchip Technology
MIC2185YQS DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
