MIC2182-5.0YSM-TR Overview
In the 16-SSOP (0.209, 5.30mm Width) package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) are supported. 4.5V~32V is the operating voltage and supply voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. This switching controller can switch at 300kHz. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Enable, Soft Start. Other relevant dc to dc converter ics can be found by searching "MIC2182". The switching converter has a total of 16 pins. According to the test statistics, DC regulator outputs 5V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 20mA. A duty cycle set at 86 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. This dc regulatorhas a max frequency of 330kHz. Ideally, dc regulator should be kept at a temperature of -40°C or higher. There should be 85°C more than 85°C degrees Celsius in the machine. Its supplier dc dc controller package is 16-SSOP. Switching with 1 phases is the property of this controller. Maximum supply voltage is 32V.
MIC2182-5.0YSM-TR Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Soft Start
Max Duty Cycle: 86 %
MIC2182-5.0YSM-TR Applications
There are a lot of Microchip Technology MIC2182-5.0YSM-TR DC to DC converter applications.
- Industrial controllers
- Power supplies of electronic gadgets
- Surge protection circuits
- Driver circuits
- Scientific testing
- Plate bending machines
- Grinders
- Drilling machines
- Experimental setup
- Hydraulic presses
