MIC2164YMM Overview
It comes in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaged in solid enclosures, this pmic has a Tube rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). Voltages 3V~28V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~125°C TJ. With this switching controller, you can switch at 300kHz. dc dc regulator is made easier with Surface Mount. Enable provides dcdc regulator efficient switching control. You can find other relevant dc to dc converter ics by searching "MIC2164". Pins number 10 of switching converter in total. A 5.5V voltage of DC regulator was detected in the test statistics. You should note down the dc dc regulator's usual output current of 25A when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 87 % on power-up or power-down to ensure reliability. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controller operates at 300kHz Hz. A temperature -40°C lower than -40°C should be maintained. At a temperature around 125°C degrees Celsius, dc regulator should be running. Thare are switch converters of the Hyper Speed Control? series. The maximum input voltage of dc switcher is 5.5V, so users should limit their voltage accordingly. This part's supplier dc dc controller package would be 10-MSOP. Voltage 3V must be supplied. The switching converter can output 5.5V volts at its utmost, according to the datasheet. It runs on a supply current of 3mA. This controller switches with 1 phases. As far as maximum supply voltage is concerned, switching voltage regulators is rated as 28V. There is a possibility that a current higher than 3mA will cause improper operation of the component and possibly damage switching voltage regulators.
MIC2164YMM Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
Max Duty Cycle: 87 %
Frequency: 300kHz
MIC2164YMM Applications
There are a lot of Microchip Technology MIC2164YMM DC to DC converter applications.
- Ball screw pair
- SMT equipment
- Window air conditioners
- Overvoltage protection circuits in TV sets
- Combined machine tools
- Power supplies of electronic gadgets
- Automation technology
- Various CNC machine tools
- Various precision measuring instruments
- Communication system
