MIC2077-2YM Overview
It is package in Tube case.This package is included in 16-SOIC (0.154, 3.90mm Width).The mounting type of the LED driver is Surface Mount.It owns the USB Switch switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.It is possible to use 4 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.It comes under the family of MIC2077.In order to operate, 16 pins are used.The lighting driver's maximum output is 500mAV.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.It is mounted in the way of Surface Mount.There is 150mOhm resistance on the LED driver.A maximum operating temperature of 85°C°C is required for stable operation.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.There is a maximum supply voltage of 5.5VV that it is capable of handling.You can also run it at 2.7V volts if required.
MIC2077-2YM Features
Resistance of 150mOhm
MIC2077-2YM Applications
There are a lot of Microchip Technology MIC2077-2YM Power Switches ICs applications.
- Notebook PC
- PDAs
- Storage Drives
- USB3.1 Power Delivery
- PC Card Hot Swap
- HDD and SSD
- PC Cards
- Portable GPS
- Mobile Communication Devices
- Portable Devices
