MCP6H84-E/ST Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 14. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 14 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . As long as the supply current of the chip does not exceed 700μA, this op amp ic can operate. There should be no change in the voltage gain at 120dB. In total, there are 4 circuits on this buffer amplifier. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has.
MCP6H84-E/ST Features
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
MCP6H84-E/ST Applications
There are a lot of Microchip Technology MCP6H84-E/ST Instrumentational OP Amps applications.
- Tablets
- Navigation
- High speed sample
- E-book readers
- RF cable systems
- Signal filtering
- Micro signal measurement
- Signal transformation
- Integrator circuits
- ECG equipment
