MCP6549T-E/ST Overview
In order to make transportation easier, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .A comparator with an output type of CMOS, Open-Drain, Rail-to-Rail, TTL is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has14 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as General Purpose .A total of 4 elements can be found in it.A total of 14 pins are included.A Surface Mount mounting type is recommended.A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 14 pins.Alternatively, you may search for MCP6549 to find more pin-to-pin solutions for your specific needs.There is 1μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.The device can be run with 1.6/5.5V power supplies.The part can be supplied with a minimum current of 0.001mA .
MCP6549T-E/ST Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6549T-E/ST Applications
There are a lot of Microchip Technology
MCP6549T-E/ST linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
