MCP6547-I/SN Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, Open-Drain, Rail-to-Rail, TTL output.The part will be shipped by Tube .Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 2 elements.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator is equipped with 8 pins.Search MCP6547 to find more pin-to-pin solutions.There is a quiescent current of 1μA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 1μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1μA .An increase in temperature over 85°C is not recommended.Comparator electronics cannot be operated at a temperature lower than -40°C .In the comparator, the maximum supply voltage is 5.5V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 1.6V .As a result, 2 channels work together to maintain the quality of the output.
MCP6547-I/SN Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6547-I/SN Applications
There are a lot of Microchip Technology
MCP6547-I/SN linear comparators applications.
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
