MCP6281-E/MS Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp of this type is a General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. In this case, there are 8 pins on the board. This linear amplifier should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are included on the operational amplifiers. Op amp ic rates 3mV for input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . There should be no change in the voltage gain at 110dB. Buffer op amp is equipped with 1 channels on the device. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. As a recommendation, this electronic component should be used with a power supply that can deliver 450μA.
MCP6281-E/MS Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
MCP6281-E/MS Applications
There are a lot of Microchip Technology MCP6281-E/MS Instrumentational OP Amps applications.
- Communication
- Weighing systems
- Automation control systems
- Industrial control system
- High/low-pass filter circuit
- Car stereo
- Large motor controllers
- Strain gauges
- Micro signal measurement
- Radar
