MCP6234T-E/SL Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. We are approaching the 14h termination of the year. The pins on this board total to 14 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 14 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 20μA . 110dB should be the voltage gain. On the output type, there are Rail-to-Rail different types of op amps. The linear amplifier consists of 4 different elements in total. The operating supply voltage of the buffer op amp is rated at 5.5V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.
MCP6234T-E/SL Features
14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
MCP6234T-E/SL Applications
There are a lot of Microchip Technology MCP6234T-E/SL Instrumentational OP Amps applications.
- Test and measurement instruments
- Signal amplification
- Scintillation detectors
- High input resistance broadband
- Large motor controllers
- Oscilloscopes
- Automation control systems
- Biopotential
- Switching amplifier
- High-frequency data acquisition systems
