MCP6042-I/P Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 8 pins on it. Op amp rates 3mV as input offset voltage. Through Hole is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . There should be no change in the voltage gain at 115dB. On the buffer amps, there are 2 channels that can be used. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5.5V. A supply of 600nA or higher is recommended for use with this electronic part.
MCP6042-I/P Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6042-I/P Applications
There are a lot of Microchip Technology MCP6042-I/P Instrumentational OP Amps applications.
- earphone
- Tablets
- Automotive sensors
- Signal amplification
- Large motor controllers
- Active probe
- Wireless base stations
- Communication device
- Measurements of Wheatstone bridge
- Video conversion and routing
