MCP4912-E/P Overview
In the 14-DIP (0.300, 7.62mm) package, you will find it. In order to operate it, a voltage supply of 5V volts is required. FPGA parts like this belong to the Other Converters family. Through Hole-connectors can be used to attach this FPGA module to the development board. As far as the operating temperature is concerned, it should be kept within -40°C~125°C when operating. Unlike other FPGA models, this one is contained in Tube for the sake of space saving. 14 terminations are present in total. You can find related parts by using the part number MCP4912, which is its base part number. In order to make it work, 14 pins have been designed. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Through Hole. Its flexibility is fully utili5Ved when operated with a supply voltage of 5V. There is a 5V power supply that is required to operate it. With a total of 14 pins, it is equipped with a high level of security. It can accept a maximum voltage of 5.5V volts as a supply voltage. A minimal supply voltage of 2.7V is required for it to operate.
MCP4912-E/P Features
14-DIP (0.300, 7.62mm) package
14 pin count
14 pins
MCP4912-E/P Applications
There are a lot of Microchip Technology
MCP4912-E/P Digital to Analog Converters (DAC) applications.
- Data Acquisition Systems
- Calibration
- Motor Control
- Data Distribution System
- Digital Potentiometer
- Software Radio
- Wireless infrastructure:
- WCDMA, CDMA2000, TD-SCDMA, WiMAX
- Wideband communications:
- LMDS/MMDS, point-to-point
