MCP4902-E/P Overview
The package that contains this software is called 14-DIP (0.300, 7.62mm). In order for the device to operate, a supply voltage of 5V volts needs to be provided. Part of the Other Converters family, this FPGA part is a programmable gate array. FPGA modules can be attached to development boards using a Through Hole-connector. It is recommended that the operating temperature be kept within the range -40°C~125°C while the machine is operating. It is designed to maximiTubee space efficiency by containing the FPGA model in Tube. In total, it has a total of 14 terminations. If you are looking for related parts, you can use the base part number MCP4902 as a starting point. In this case, 14 pins are used in the design. In my opinion, this FPGA could produce fantastic results if mounted in Through Hole, provided that its specifications are followed. Design engineers can fully take advantage of its flexibility when operating at 5V supply voltage. In order for it to work, it requires a 5V power supply. A total of 14 pins are included in this device. This device is capable of supporting a maximum supply voltage of 5.5V. Using 2.7V as the minimum supply voltage, it can operate.
MCP4902-E/P Features
14-DIP (0.300, 7.62mm) package
14 pin count
14 pins
MCP4902-E/P Applications
There are a lot of Microchip Technology
MCP4902-E/P Digital to Analog Converters (DAC) applications.
- Calibration
- Motor Control
- Data Distribution System
- Digital Potentiometer
- Software Radio
- Wireless infrastructure:
- WCDMA, CDMA2000, TD-SCDMA, WiMAX
- Wideband communications:
- LMDS/MMDS, point-to-point
- Instrumentation:
