MCP1703AT-3002E/CB Overview
In a Tape & Reel (TR) case, the IC voltage regulator is delivered. A TO-236-3, SC-59, SOT-23-3 case contains the Liner IC. In total, there are 3 terminations on the gadget. This PMIC chip has an output type of Fixed. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 250mA. There are 3 pins in total on this board. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. A 3-pin is present on the chip. It is MCP1703 for this voltage regulator IC, just for your information. I would describe this component as a typical PMIC - Power Management ICs component. In this case, the regulator type is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR, which corresponds to this voltage regulator IC. It operates in the 5μA Quiescent Current state. In fact, it is voltage regulator IC of the MCP1703A Series of cameras. A 2 uA supply current is required for the voltage regulator IC to operate. Tolerance for this regulator IC is 2 %, which is very low.
MCP1703AT-3002E/CB Features
625mV dropout voltage
PMIC - Power Management ICs subtageroy
2 % tolerance
MCP1703AT-3002E/CB Applications
There are a lot of Microchip Technology
MCP1703AT-3002E/CB Linear Voltage Regulators applications.
- Portable telephone
- Electronic notebook
- Camera
- Video equipment
- CPU power supply
- Switching regulator
- Multiple-power supply system
- Digital audio player
- Digital TV
- Smartcard
