MCP1631HV-330E/SS Overview
In the 20-SSOP (0.209, 5.30mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 3.5V~16V volts and has 3.5V~16V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Ramp is included in the dcdc regulator. DUAL are the position of the terminal of the switching converters. Various 20 terminations. In addition to "MCP1631HV", there are other relevant dc to dc converter ics you can find. There are 20 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 3.3V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 250mA. Voltage regulator dc to dc is designed to operate at 10 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator2MHz has the maximum frequency. Components may become damaged if their current exceeds 2A. The frequency at which this controller can perform well is 2MHz.
MCP1631HV-330E/SS Features
Transistor Driver Outputs
Enable, Frequency Control, Ramp
Max Duty Cycle: 10 %
Switching Frequency: 2MHz
MCP1631HV-330E/SS Applications
There are a lot of Microchip Technology
MCP1631HV-330E/SS DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
