MCP1630V-E/MS Overview
With a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tube solid enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. 3V~5.5V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. The Surface Mount value makes it suitable for general dc dc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 5V. Other relevant dc to dc converter ics can be found by searching "MCP1630". There are 8 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at a frequency of 1MHz. For better satisfaction, the value of DC to DC voltage regulator is CAN ALSO BE CONFIGURED IN AVERAGE CURRENT MODE. In a dormant state, the dc switching uses 2.8mA. It is possible to set the input voltage as 5V for nominal working statuses. There is 2.8mA supply current for it. The frequency at which this controller can perform well is 1MHz. For operation, the switching converter could be satisfied with 2.8mA current flow input.
MCP1630V-E/MS Features
Transistor Driver Outputs
PULSE WIDTH MODULATION
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN AVERAGE CURRENT MODE
Switching Frequency: 1MHz
MCP1630V-E/MS Applications
There are a lot of Microchip Technology MCP1630V-E/MS DC to DC converter applications.
- Computed tomography (CT)
- Various precision measuring instruments
- Sink circuits
- Digital display device
- Communication system
- Driver circuits
- Current source circuits
- Large fire protection systems
- Computer rooms
- Automation technology
