Name: MCP1630T-E/MS
Brand: Microchip Technology
SKU: MCP1630T-E/MS
Price: 1.57000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	14 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MCP1630
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	1
Output Type	Transistor Driver
Operating Supply Voltage	5.5V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive, Isolation Capable
Output Current	11mA
Voltage - Supply (Vcc/Vdd)	3V~5.5V
Max Supply Current	4.5mA
Quiescent Current	2.8mA
Input Voltage (Min)	3V
Topology	Buck, Boost, Buck-Boost, Flyback, SEPIC
Control Mode	CURRENT-MODE
Control Technique	PULSE WIDTH MODULATION
Rise Time	5.9ns
Synchronous Rectifier	Yes
Fall Time (Typ)	6.2 ns
Switcher Configuration	SINGLE
Max Frequency	1MHz
Max Duty Cycle	75 %
Switching Frequency	1MHz
Clock Sync	No
Duty Cycle	75 %
Length	3mm
Width	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MCP1630T-E/MS Product Details

MCP1630T-E/MS Overview

It comes in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 3V~5.5V voltage are supplied and operated. A -40°C~125°C TJ dc switcher is not a problem. It is suitable for general dc dc regulator when it is set to Surface Mount. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 8 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. MCP1630 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Switching converter is a special type of Switching Regulator or Controllers. 3V should be the minimum input voltage for the dc dc voltage regulator. You should note down the dc dc regulator's usual output current of 11mA when you start a project. A duty cycle set at 75 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. This dc regulatorhas a max frequency of 1MHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 5.5V. DC switchings that are dormant use 2.8mA. In the presence of a current greater than 4.5mA, the component may fail to operate properly and may be damaged. 1MHz is the frequency at which this controller performs well most of the time.